Is there a machine to germinate cannabis seeds

How to Germinate Cannabis Seeds

An in-depth guide on how to germinate cannabis seeds. Discover different techniques on how to germinate marijuana seeds to ensure a successful cannabis crop.

Everything has a beginning.

Cannabis seeds, like all seeds, must undergo the germination process before it can grow into a weed-yielding beauty.

Countless cannabis germination guides litter the internet. However, none go as in-depth as our seed germination tutorial. Read along to learn how to germinate marijuana seeds like a pro.

You’ll discover everything you need to know about the art of germinating marijuana seeds. From the necessary equipment to different germination methods and everything in between, we’ve got you covered.

The Chemistry Behind Cannabis Seed Germination

Cannabis seeds require the right conditions to sprout.

Without the proper temperature, moisture level, or oxygen saturation, weed seeds will not germinate. Although you can readily germinate seeds outdoors, nothing beats controlled germination indoors.

Let’s take a look at the three primary elements that influence the germination rates of marijuana seeds.


Water is the key player in the process of germinating marijuana seeds.

The outer-layer of the cannabis seed acts as a protective casing that provides a two-fold defense — prevent damage to the inner embryo and prevent minimal moisture from premature germination.

However, if the marijuana seed is saturated with water, it will eventually absorb the moisture and kick-off the germination process.


Once the embryo activates through water saturation, it requires oxygen to jump-start the respiration process. Oxygen fuels respiration, which unlocks food stored within the embryo.


After the respiration process, the embryo consumes the food stores, which in turn produces energy. Energy is the necessary product that propels the germination stage onwards.


Even if cannabis seeds have access to water, oxygen, and energy, it’s all for nothing unless it has access to warmth.

As long as cannabis seeds experience 72-78°F during the initial germination process — they’ll burst forth from the ground and spread their primordial leaves under the sun or artificial light.

The three most important elements for successful weed seed germination

Why It’s Important to Germinate Weed Seeds Indoors

At its core, the germination process lays the foundation of cannabis plants.

Overall, marijuana plants will underperform without proper germination techniques compared to those that experienced ideal conditions during the germination process. Therefore, it’s always best to harness an indoor environment when germinating marijuana seeds.

What to Look For Before Germinating Marijuana Seeds

Before you begin the germination process, there are a few things you must look for.

Let’s take a brief look at each.

Damaged Marijuana Seeds

Ordering feminized or autoflowering cannabis seeds online is the best way to acquire top-shelf genetics.

The seeds, however, may experience a few bumps on the road during the shipping process. With this in mind, you must look over each seed to ensure there isn’t any damage.

As long as each weed seed is undamaged, the germination process will be smooth.

The Cannabis Seed’s Age

Next, it’s a good idea to write down the date on each seed pack once received.

By doing so, you’ll have a clear understanding of a seeds’ age. Like all things, cannabis seeds lose their luster as the years go by. Cannabis seeds may remain viable for decades. However, germination rates decrease over time.

Therefore, you should only germinate seeds that are properly stored for a maximum of 6-months.

The Cannabis Seeds Color

Lastly, you must check the cannabis seed’s color.

Cannabis seeds come in different sizes and exhibit various markings across the outer seed coat. However, the seed’s color is an excellent indicator that represents seed maturity.

In other words, light green to pale white seeds are immature and are likely unviable. Therefore, always make sure that your cannabis seeds are light to dark brown color before germination.

Take a close look at the seeds that you receive for damage or discoloration

Should You Use a Seedling Heat Mat?

Many new cannabis cultivators ask if they should incorporate a seedling heat mat into the equation.

Although seedling heat mats are excellent tools to ensure fast germination, they are not always necessary. Seedling heat mats work by producing a gentle warmth that won’t rapidly dry cannabis seeds during the germination process.

However, they may be overkill if you utilize them during hot days, such as those during the summer months. Alternatively, they are essential during colder months during the winter. Therefore, you can choose to harness a seedling heat mat based on the time of year that you choose to germinate marijuana seeds.

Three Easy Methods To Germinate Cannabis Seeds Indoors

Now that you have a broad understanding of germinating marijuana seeds let’s get some weed seeds poppin‘ with a few different step-by-step tutorials.

You’ll have a better idea of which germination technique to choose once you’re done reading this section.

1. How to Germinate Marijuana Seeds in Soil in Five Easy Steps

If you want to germinate weed seeds au natural — there’s no better option than using soil.

See also  How to become a cannabis seed bank

Here’s a list of what you’ll need to germinate cannabis seeds in soil:

  • Feminized or autoflowering cannabis seeds
  • Eco-friendly “starting” container
  • Soil
  • Water
  • Label
  • Heat mat (optional)

As you can see, the list above isn’t extensive in the least. In other words, germinating marijuana seeds in soil is incredibly affordable.

Step One

First, fill an eco-friendly starting container with soil.

The golden rule? Don’t pack down the soil. Remember, the soil you choose must exhibit a loamy consistency. Hardpack soil does not allow proper water drainage and oxygen circulation, which, as you learned previously, are critical components for the seed germination process.

Furthermore, if you choose to use a heat mat, place the eco-friendly containers on top to warm the medium adequately.

Step Two

Label each container.

The last thing you want to do is forget what seed you placed into each container — especially if you’re germinating multiple cannabis strains at once.

Step Three

Now, it’s time to sow the cannabis seed.

Create a small hole that’s roughly 0.25-inches (6mm) deep. Gently place the seed inside the hole and cover it. It does not matter which direction you put the seed — believe us when we say that the seed and gravity will sort things out.

It’s important to note that each eco pot should contain a single cannabis seed.

Step Four

Gently pour a small amount of water into the area where you buried the cannabis seed.

At this point, you must ensure that the cannabis seed never dries out. Once the germination process begins — there’s no turning back. Therefore, allowing cannabis seeds to dry will guarantee inadequate germination or premature death.

Ultimately, you must monitor the soil and continuously apply water until the seed sprouts.

Step Five

The final step is patience.

The moment the seed is planted, most beginners ask: how long does it take to germinate cannabis seeds, or how can I germinate my seeds fast?

Healthy cannabis seeds typically break the surface within 2-4-days. Older seeds, however, may take upwards of 12-days to sprout.

The germination phase is an incredibly vulnerable moment for cannabis seeds. Therefore, Do notwe repeatdo not dig up the seed to “check on it.”

This is what you can expect after you successfully germinate your cannabis seeds in soil

2. How to Germinate Marijuana Seeds Using Paper Towels In Five Easy Steps

One of the most popular germination techniques is the paper towel method.

Here’s a list of what you’ll need for this low-budget method:

  • Feminized or autoflowering seeds
  • Dinner plate
  • Paper towels
  • Spray bottle
  • Labels
  • Heat mat (optional)

Now that you’ve gathered the necessary supplies let’s get crackin‘.

Step One

Place two to three sheets of paper towels on top of a clean dinner plate. If you decide to use a heat mat to increase the temperature, place it under the dinner plate.

Step Two

Label the dinner plate with the name of the cannabis strain of choice.

Step Three

Place up to 10-seeds per plate.

You must make sure that a minimum of 1-inch adequately separates the seeds.

Step Four

Spray water on the seeds until the paper towels are completely saturated. Once done, place a new layer of 2-3 paper towel sheets on top of the seeds. Use the spray bottle to soak the new paper towel addition.

Remember: the paper towels must always remain saturated with water. If allowed to dry, the cannabis seeds will fail to germinate.

Step Five

The germination process should occur within 24-48-hours. After 48-hours, gently peel back the upper paper towel section. If the seeds germinate, you will see cracked-open seeds with an emerging radicle.

At this point, it’s time to move the germinated seed to its new home with a pair of tweezers. This final step requires extreme care because the radicle is fragile, and if broken, the embryo within will die.

Be careful when you use the paper towel method and make sure to label each plate

3. How to Germinate Marijuana Seeds Using Rooting Cubes in Five Easy Steps

Germinating weed seeds with rooting cubes is the ideal method for beginners and professionals alike.

Overall, rooting cubes provide the ease of the paper towel method and the soil technique’s efficiency. Let’s take a look at everything you need to when germinating marijuana seeds with rooting cubes.

  • Feminized or autoflowering seeds
  • Rooting cubes
  • pH 6.0 water
  • Rooting tray
  • Labels
  • pH meter and pH up or down
  • Heat mat (optional)
Step One

First and foremost, place the rooting cubes in the rooting tray. If you decide to use a heat mat, place the tray on top.

Step Two

Next, label each rooting cube or tray with the appropriate name of each cannabis strain.

See also  Animal og seeds
Step Three

Use a pH meter and pH solution to achieve a pH of 6.0.

The amount of water you pH depends on the number of rooting cubes. Start with one cup of water if you are germinating less than ten seeds.

Germination cubes require a pH of 6.0 because they are typically made from peat moss, rockwool, or other soilless-based mediums. Therefore, a pH of 6.0 will ensure the best possible results once the seed germinates.

Step Four

Each rooting cube is equipped with a pre-made hole.

Place one cannabis seed per hole. You may tear off a small piece of the substrate to cover the opening. Once done, saturate the rooting cube with pH 6.0 water.

You must make sure that the rooting cube never dries out. Remember, cannabis seeds must remain moist until they sprout to the surface.

Step Five

Once again, patience is the final step when you learn how to germinate cannabis seeds with rooting cubes. Overall, cannabis seeds may emerge from the rooting cube within 2-4-days. However, germination may take as long as 7-days.

There are a lot of rooting cubes to choose from, but the germination process remains the same

How to Germinate Old Cannabis Seeds

Now that you understand how to germinate healthy cannabis seeds let’s quickly discover how to germinate old marijuana seeds.

As you become infatuated with the world of cannabis, you’ll soon begin to stack an extensive seed collection. Don’t worry; we’re all seed hoarders at heart because there are so many incredible cannabis genetics out there.

Eventually, however, you’ll notice that you have more than a few old cannabis seeds. Luckily for you — all is not lost.

Here’s our tried and true technique to give your old seeds a boost during the germination process.

Cannabis Seed Scarification

Scarring cannabis seeds is incredibly simple.

All you need is a nail file or a piece of sandpaper. Use the file or sandpaper across the surface of the seed in question. You do not need to use an immense amount of force, but instead, a few good scrapes to scar the seed’s outer shell will do.

The point of seed scarification is to allow water to penetrate the seed coating easily. By doing so, the embryo receives a jump start that initiates the germination process.

Once the seeds are scarred, you may choose one of the three above mentioned techniques to complete the germination process.

A few readily available tools to get your cannabis seed scarification done

The Best Way To Germinate Marijuana Seeds

Now that you’re done reading this guide on seed germination — which method will you choose?

The soil, paper towel, and rooting cube methods are all tried-and-true and provide excellent germination rates. Remember, cannabis seeds are an investment, and you must use the best germination method possible to ensure a healthy cannabis crop.

You have one chance to germinate each seed the right way, and by using this guide, you’ll make each seed count.

Successful germinating cannabis seeds

If you are an experienced marijuana grower you’ve already established all necessary information which is often derived from personal experience and stories of fellow growers who wish to transfer their knowledge. As a beginner it can be quite overwhelming because of the diverse amount of technical information available.

In this guide we try to set aside the overdose of technical information so both the experienced grower as well as the less experienced grower can use this information to start successfully.Cannabis cultivation and the associated knowledge must finally be accessible and understandable to everyone.

Germinating your cannabis seeds.

Cannabis seeds grow the same way as any other seed, place it in soil and if all goes well the seed will grow out to become a beautiful decoration in addition to your garden, balcony or window. The inside of cannabis seeds consist of a mix of nutrients and moisture that causes the seed to survive a period of time in your refrigerator or in some circumstances underneath the soil, the hard shell is to protect the inside of the seeds.

However it seems logical to plant your cannabis seed directly in soil but there are two other methods you can apply for a successful germination, with these methods it is easier to monitor the germination process because they’re not hidden. The first method is to place the seed directly in soil, when you place the seed in garden soil make sure it no longer freezes at night because this can cause the seed to die or rot due to fluctuation of temperature and moist.

Place the cannabis seed at least 1 centimeter in the ground, carefully fill it up with soil and water it.

Not too much water because that could start up a rotting process.

After about 3 to 7 days (in some cases even longer) you can see something growing, it raises its head just above the soil, keep it moist.

See also  Cannabis seeds for sale in lyons colorado

This method requires patience because it seems to last longer compared to other methods, many beginners get frustrated because there are no quick results visible and are convinced there’s something wrong with the seed while in fact there isn’t. When you decide to use this method placing the seeds in pots make sure the pots at least content 20 liters, this avoids re-potting the plant risking to damage the roots, the root system is very important as the foundation of the whole plant.

The second method is to place the seed in a glass of water, avoid strong fluctuation of temperature, a constant 20 degrees is ideal. As long as the seeds do not germinate, it is advisable to refresh the water every other day, when you refresh handle the seed with extra care because soap or acid on your hands can influence the cannabis seed in a negative way.

After about 2 to 5 days, the little white root will show and when it is about 3 millimeters long they can be put into the ground, the little root downwards and the head of the seed just above soil. The third method is often the most effective one, place the seed between two damp to wet tissues leaving it on a plate or whatever you have.

Just take a paper towel and fold it, then drizzle it with clean water, place the seeds on one side and fold together. Make sure air reaches the seed, the combination of moist and fresh air has a positive effect on the germination process.

So whatever you do, don’t strain the plate with plastic to make it air tight, this will only cause the seed to rot, it needs air, avoid the paper towel to dry out because when tissues dry out the root could get damaged when you try to remove the seed from it, especially when its longer than 4 millimeters. When the root is damaged a healthy plant can not be guaranteed !

Opinions about where to place the dish are often divided but in fact it does not matter, whether you place the dish in a dark or light spot, both spots work fine as long as the temperature doesn’t fluctuate too much. When the root appears place it in soil and again, root down and head just above the soil is the best way.

Of course things can go wrong, even when you’ve practiced the best germination method with the best soil and equipment, cannabis seeds are a product of nature and unfortunately it is still not possible to check the inside of the seed. You can only tell for sure if a cannabis seed is successful when it has germinated. Just as well as poor looking seeds can grow out to be a big healthy plant.

After germination the seedling can be placed in the spot of your choice, don’t wait too long providing the most optimal environment because when she is in need of light or water a successful process is being slowed down.

Make sure when you grow her indoors the lights are at the right distance to avoid stretching, stretching means the seedling is not developing but only getting taller in order to receive enough light. You’ll see that the stem will get longer but she stays thin without growing any side leaves and can cause the plant to break and die.

Pre growing

Pre-growing gives your little seedling the change of a healthy indoor development without having to deal with bad weather or strong fluctuating weather conditions appearing at the end of winter. In a lot of countries spring still has freezing nights and lack of sun and specially for these situations pre-growing is almost a must ! By the time the weather improves the cannabis plant has strong roots, has developed a good set of leaves and is ready to be placed outdoors.

There are semi-professional set ups available in many grow stores but to be honest an energy saving light bulb of 20 watts (equals 100 watt light bulb) or TL-Lights with blue spectrum (white light) will do just fine for pre-growing and it prevents you from having to buy expensive equipment, the choice is yours !

Whatever you do make sure to hang the lamp at the right distance, compared to professional lights temperatures from saving bulbs and TL lights don’t get as hot and won’t burn the leaves easily so professional lights should be placed further away than TL or saving bulb. Pre-growing autoflowers won’t demand special white light, they are fast growers who benefit from warm yellow lights immediately and have the tendency to grow into a compact little plant with a head stem of at least half a centimeter but again, lights and distance is very important.